Dodge 3rd Generation
HTB2 Series – 65mm Turbine Wheel
2003-07 HTB2 Street Stock 62
12cm Cast Iron Exhaust Housing
HP Range 450 – 525
Hardware (nuts, bolts, studs and gaskets) included where needed.
Turbos for 94-2002 are "bolt-up" except for the exhaust downpipe.
If you have been running an HX40W then our outlet flange will make connecting to your HX40 downpipe easy.
The exhaust elbo necks down on the 03-06 turbos and do not require a downpipe but we do offer a performance downpipe for the 03-early 04
since the stock exhaust elbow necks down.
An important factor to consider with your turbo purchase is an inexpensive upgradability.
We don't want you to grow out of your turbo in 6 months.
Our turbos can grow right along with your horsepower needs:
You can send in your S300G, HTBG or HTB2 we will upgrade your turbine wheel, turbine housing, compressor wheel, or compressor cover to whatever size you choose.
You can even send in a competitor's turbo for modification and upgrade.
A larger, freer flowing air cleaner system (as well as 4" exhaust) is a prerequisite for these high flow turbos.
Be sure you get enough air to these turbos by replacing the restrictive air cleaners
Note: BCR included with 3rd generation turbos
Note: 2004.5 2006 requires a Boost Control Resistor (BCR)