Description
SAFETY BLANKET FOR COMPRESSOR SIDE OF TURBO, PRO STOCK VERSION
- FITS MOST HX82 AND LARGER HOUSINGS
- 40″ LONG
- MEETS PPL AND NTPA STANDARDS
NOT SURE WHICH ONE YOU NEED? THIS IS A GUIDE TO HELP: THE 2.6 (H5 FRAME) 3.0, 3.6 – 4.1 BLANKET IS 34″ LONG (H5) AND THE PRO STOCK BLANKET IS 40″ LONG (HX82) MEASURE AROUND THE SNAIL OF THE COMPRESSOR COVER STARTING ON THE INSIDE AND GO AROUND TO THE FLANGE OF THE OUTLET.
FOR SUPER FARM AND SMALLER S4 SIZE HOUSINGS, WE OFFER A 30″ BLANKET
Turbo Blanket required by PPL & NTPA – Made by Taylor Motorsports
Rule Clarification:The rule pertaining to the containment device on a multi turbo diesel truck or tractor has been changed to read: C. Turbocharger Containment Note: This rule only applies to turbocharger(s) with larger than 3 inch diameter inlet. 1. Diesel Engines: Any single turbocharger or the turbocharger mounted directly to exhaust manifold on a multi turbo setup must have a Kevlar lined containment device (bag or blanket) that completely encloses the intake compressor housing. Bag or blanket used must be commercially available from a PPL AND NTPA approved manufacturer.Note: containment device cannot be homemade.
