Fast guide to Smarty-J67 software levels
-
The horsepower settings have a modified “Torque
-
management” ( TQM ). The throttle response is greatly
-
improved but is set to a safe limit. With “Safe” I mean safe for
your tranny and rest of the driveline.
- SW # 1 : 40 Hp increase
- SW # 2 : 70 Hp increase
- SW # 3 : 100 Hp increase
-
Tested on stock trucks on a
Dyno
-
Stock means just that. Stock! Even the air filters were stock…
We checked the “baseline” ( the stock truck Hp at the rear
wheels ) twice in a day in order to be sure about our findings.
The above declared HP numbers are all rounded down to the
closest number.
ABS / Speedo recalibration
The tire height can be adjusted up to 44″ in increments of 10
tenth of an inch in just a couple seconds. Of course, Smarty
needs to be VIN# locked to the truck in order to get into the ABS
adjustment section.
DTC Code reader
The name says it all.
You can read and erase codes. Codes are displayed also in
plain English. That’s old news by now. Smarty S-03 was the first
one to provide that utility, others found the idea to be a good
one too.
( Smarty does erase ABS codes too but does not display them )
ECM update speed
Faster than anything else on the market! Again we’ve done our
homework on the protocol. About 5 minutes. Three times faster
than a Star-Scan diagnostic tool or competitor.
We have developed our own bootloader in order to not have to
pull fuses should an update become interrupted for any reason.
All you have to do is to turn the key off / key on Smarty does
everything else on it’s own.
Updates
The CaTCHER softwares as they are today are only a starting
point. Expect major news in future. We’re for your feedback,
opinions, likes, dislikes…
We will make Smarty do what YOU want, TOGETHER |
Reviews
There are no reviews yet.